Datasheets

Liste des datasheets que j’ai pu glâner et récupérer un peu partout…

Analog to digital converter

Analog Device AD9983A [ discontinued - Replacement : AD9984A ]
8-bits display interface
140 MSPS maximum convertion rate
4:4:4, 4:2:2 and DDR output format modes
Analog Device AD9984A
10-bits display interface
170 MSPS maximum convertion rate
4:4:4, 4:2:2 and DDR output format modes

TPS63020, TPS63021
High Efficiency Single Inductor Buck-boost Converter with 4-A Switches.

AP2114
The AP2114 is CMOS process low dropout linear regulator with enable function, the regulator delivers a guaranteed 1A (Min) continuous load current.
Available in 1.2V, 1.5V, 1.8V, 2.5V and 3.3V regulator output and 0.8V to 5V adjustable output.
Low Dropout Voltage (3.3V): 450mV (Typ) @IOUT=1A

TXS0108E
8-Bit Bi-Directional, Level-Shifting, Voltage Translator for Open-Drain and Push-Pull Applications.

MP2731
The MP2731 is a 4.5A, highly integrated switch- mode battery charge management device for single-cell Li-ion or Li-polymer batteries.

ATmega164P-324P-644P
16K/32K/64K Bytes of In-System Self-programmable Flash program memory
512B/1K/2K Bytes EEPROM
1K/2K/4K Bytes Internal SRAM
ATtiny48-88
4K/8K Bytes of In-System Self-programmable Flash program memory
64/64 Bytes EEPROM
256/512 Bytes Internal SRAM

RFM69HCW
Module transceiver 315,433,868 et 915MHz (fréquence ajustable en software).
Modulations FSK, GFSK, MSK, GMSK et OOK.
Packet engine with CRC-16, AES-128, 66 bytes FIFO.

CHY103
Charger Interface Physical Layer IC with Complete System Level Protection.
NCP4371
NCP4371 is a USB secondary side fast−charging controller, supporting Qualcomm Quick Charge 3.0 (QC 3.0) High Voltage Dedicated Charging Port (HVDCP) Class A and Class B specification.

AP33771C
The AP33771C is a highly integrated USB Type-C® PD3.1 sink controller to support Extended Power Range (EPR)/Adjustable Voltage Supply (AVS) up to 28V and Standard Power Range (SPR)/ Programmable Power Supply (PPS) up to 21V. The device is targeted for DC power request and control for Type-C Connector-equipped Devices (TCDs) through simple external resistor setting.
Up to 28V 5A (140W).
STUSB4500
The STUSB4500 is a USB Type-CTM and power delivery controller IC for sink applications. It is able to negotiate a power delivery contract with a source without MCU support (auto-run mode).
Up to 20V 5A (100W).